Any Phase linear 2000 fans out there?

[blackthorne]

Hey,

I have a phase linear 2000 preamp and was wondering if you could tell me the specs (THD, signal-to-noise ratio, etc). Also, i was looking for some specifics on the phono stage...(THD, signal-to-noise ratio, etc).

Thanks

 

[buckleboy]

Try the following web site. Looks like it's mostly Phase Linear amp info but it could lead to something.

I've been looking at one of those locally. Let me know what you think of it. I just picked up an SAE Mark XXX preamp that sounds good.

http://www.hometown.aol.com/phasetek/

 

[avguytx]

Here's another website for Phase Linear, too.

 

[blackthorne]

Hmm, looks like Id have to buy a manual from them, thanks for the replies tho... Any other ideas?

 

[Michael-Otto]

From a PHASELINEAR flyer.

SPECIFICATIONS PHASE LINEAR 2000
TOTAL HARMONIC DISTORTION: Basically so low it is unmeasurable.
Guaranteed less than .1 % at rated output with IHF measurement.
FREQUENCY REPONSE: Phono ± .5 dB of RIAA Standard
INPUT SENSITIVITY: High level input: 40 K Low level input: 47 K, 290 pf
HUM AND NOISE: 20 Hz to 20,000 Hz inputs shorted;
High level: 88 dB below 2 V
Low level: 74 dB below a 10 mV input
AMBIENCE SIGNAL: (L-R) -. L & (R-L) -. R
VOLUME CONTROL TRACKING: Less than 1dB tracking error.
GAIN: Low level (Phono) to preamplifier output:
56 dB at 1 kHz Phono to tape output:
41dB at 1kHz High level to preamplifier output: 15dB at 1 kHz
MAXIMUM OUTPUT LEVELS: Rated at 2 V; maximum 10 volts will source a 5 kohm load.
BASS: Turnover frequency 50 Hz: ± 11 dB at 20 Hz
Turnover frequency 150 Hz: ± 13 dB at 20 Hz
TREBLE: Turnover frequency 5 kHz: ± 10 dB at 20,000 Hz
Turnover frequency 2 kHz: ± 14 dB at 20,000 Hz
DIMENSIONS: 5-1/2" H x 19" x 6" D
SHIPPING WEIGHT: 15 lb.
OPTIONAL ACCESSORY: Walnut Cabinet

Michael-Otto

 

[blackthorne]

thanks michael-otto!

 

[blackthorne]

more information?

thats a good start. I was still hoping to know a little more though, do you have any more information ANYONE?